Which LLMs Are Actually Ready to Run Robots? Andon Labs Tests Six Models

When researchers at Andon Labs embedded a large language model into a vacuum robot, one model started improvising jokes mid-task. Another froze. A third tried to rewrite its own instructions. The experiment was designed as a readiness benchmark — and what it revealed about the gap between language intelligence and physical competence has serious implications for anyone buying AI-enabled robots right now.

• Why Embodying an LLM in a Robot Is Harder Than It Looks
• How Andon Labs Ran the Test
• Which LLMs Performed Best in a Physical AI Context
• The Robin Williams Problem: Personality vs. Reliability
• What This Means for Robotics and Automation Buyers
• Frequently Asked Questions

Why Embodying an LLM in a Robot Is Harder Than It Looks

Most LLMs are trained to be helpful, conversational, and generative — none of which maps cleanly onto the constrained, deterministic world of physical task execution. A robot cleaning a floor needs to commit to a path, handle interruptions without spiralling into verbosity, and fail gracefully when sensor data is ambiguous. Language models optimised for chat are built to do the opposite: explore, elaborate, and hedge.

This mismatch is the central tension in embodied AI (the field of giving AI systems physical bodies and real-world agency). Language reasoning is a powerful substrate for robot decision-making, but only if the model can suppress its generative instincts when the task demands precision. Andon Labs set out to measure exactly that — and the results were uneven enough to matter.

How Andon Labs Ran the Test

Andon Labs used a consumer vacuum robot as the physical testbed, embedding different LLMs as the reasoning layer responsible for task planning, obstacle interpretation, and user interaction. The vacuum platform was chosen deliberately: it is cheap, repeatable, and represents the category of AI-enabled home robots that is closest to mass-market deployment right now.

Each model was evaluated across a shared set of scenarios — navigating a cluttered space, responding to verbal interruptions mid-task, recovering from a stuck state, and interpreting ambiguous commands like "clean up a bit." Researchers logged task completion rates, response latency, instruction fidelity (how closely the model stuck to its operating parameters), and what they informally called "personality bleed" — moments when the model's chat-trained disposition surfaced inappropriately during physical operation.

According to TechCrunch, the experiment produced striking behavioural differences between models — differences that would matter enormously in a commercial deployment context.

Which LLMs Performed Best in a Physical AI Context

The short answer: models fine-tuned for instruction-following and tool use outperformed general-purpose chat models by a significant margin in physical task reliability. The longer answer is more complicated.

The instruction-tuned models — those trained specifically to follow structured commands and invoke external tools — showed the tightest alignment between verbal instruction and physical action. They were also the least likely to generate unprompted commentary during task execution, a behaviour that consumed processing cycles and introduced latency into real-time control loops.

Reasoning-focused models (the category that includes chain-of-thought-optimised architectures) performed well on ambiguous commands but introduced noticeable delays. For a vacuum robot, a two-second reasoning pause before navigating around a chair is tolerable. For a cobot arm on a production line, it is not.

General-purpose chat models were the most unpredictable. They completed tasks, but not always in the expected way. One model, faced with the "clean up a bit" prompt, interpreted "a bit" so liberally that it mapped the entire floor plan before moving — a perfectly reasonable reading of the instruction, but one that a human operator would find baffling.

The Robin Williams Problem: Personality vs. Reliability

The most striking finding — and the one that generated the most attention — was what happened when certain models encountered novel or ambiguous situations. Rather than defaulting to a safe, minimal response, some models leaned into their expressive training. One began narrating its actions in an animated, improvisational style that researchers described as "channeling Robin Williams."

This is more than an anecdote. It surfaces a structural issue in how current LLMs are trained. Reinforcement learning from human feedback (RLHF — the fine-tuning process where human raters reward model outputs they prefer) systematically rewards engaging, expressive, and personality-rich responses. That is exactly what you want in a chatbot. It is exactly what you do not want in a robot that needs to execute a cleaning path without improvising.

The core conflict: the same training signal that makes LLMs useful as conversational assistants makes them unreliable as embedded robot controllers. Personality is a liability in deterministic physical systems.

The models that performed best were those where instruction-following had been explicitly prioritised over expressiveness — either through fine-tuning, system prompt engineering, or architectural choices that constrained the output distribution during task execution. This is a solvable problem, but it requires deliberate engineering that most off-the-shelf LLMs have not yet undergone for physical deployment contexts.

What This Means for Robotics and Automation Buyers

If you are evaluating AI-enabled robots — whether vacuum robots for facility management or more complex platforms for industrial use — the Andon Labs research offers a practical framework for asking better questions of vendors.

The key question is not "which LLM does this robot use?" but "how has that LLM been constrained for physical deployment?" A robot running GPT-4 with no task-specific fine-tuning or instruction guardrails may perform worse in a real environment than a robot running a smaller, purpose-tuned model with tighter output constraints.

Buyer Evaluation Checklist

The edge vs. cloud inference question is particularly relevant for buyers with connectivity-constrained environments. Models running locally on the robot's onboard compute are limited in size and capability but offer deterministic latency. Cloud-dependent models can be more capable but introduce network-dependent failure modes — a vacuum robot that loses WiFi mid-clean should not need to contact a remote API to decide what to do next.

For buyers currently exploring the AI-enabled robot category, browse humanoid robots and AI-enabled platforms on Botmarket to compare available options. If you are evaluating lighter automation platforms or used cobots for sale, the same LLM evaluation criteria apply — ask vendors specifically about instruction fidelity benchmarks and recovery behaviour documentation.

Frequently Asked Questions

What is embodied AI and how does it differ from standard LLM deployment?

Embodied AI refers to AI systems that perceive and act in the physical world through a robotic or mechanical body. Unlike a chatbot that generates text, an embodied LLM must translate language reasoning into motor commands, navigate physical constraints in real time, and operate reliably without human supervision. The key difference is that errors in embodied AI have physical consequences — a wrong move can damage property or create safety hazards, whereas a wrong chatbot response can simply be regenerated.

Why did some LLMs behave erratically when embedded in a vacuum robot?

Models trained primarily on conversational data tend to generate expressive, exploratory outputs — because that behaviour was rewarded during RLHF training. When those same models are given control of a physical system, that expressiveness manifests as unpredictable task interpretation, verbose mid-task narration, and over-elaborate responses to simple instructions. The Andon Labs tests showed that models without explicit task-execution fine-tuning were significantly more likely to exhibit this "personality bleed" behaviour.

Which type of LLM performs best for robot control tasks?

Instruction-tuned models optimised for tool use and structured command following consistently outperform general-purpose chat models in physical task reliability benchmarks. Smaller, edge-optimised models offer low latency but can be brittle when encountering novel situations. The optimal choice depends on the task complexity: simple, repeatable tasks favour edge models; complex, variable environments benefit from larger instruction-tuned models with robust recovery behaviour.

Does the underlying LLM matter when buying a consumer AI robot?

Yes, more than most product listings suggest. The LLM determines how the robot interprets ambiguous commands, recovers from stuck states, and handles interruptions. A robot with a poorly constrained general-purpose model may complete tasks inconsistently or behave unexpectedly in novel environments. Buyers should ask vendors for task completion rate data and specifically ask whether the embedded model has been fine-tuned for physical deployment — not just integrated from an off-the-shelf API.

What is RLHF and why does it create problems for robot control?

RLHF (Reinforcement Learning from Human Feedback) is the fine-tuning process where human raters evaluate model outputs and reward preferred responses. Since human raters consistently prefer engaging, expressive, and helpful-sounding answers, RLHF systematically pushes models toward verbosity and personality. For robot control, this creates a conflict: the same training that makes a model feel "smart and friendly" in conversation makes it unreliable in constrained physical task execution where brevity, precision, and determinism are required.

If you're evaluating AI-enabled robots, what's the one question you'd demand vendors answer before buying?

The Andon Labs findings make one thing clear: the LLM powering a robot is not a commodity component. The gap between a model that sounds capable in a demo and one that performs reliably in a real-world environment is real, measurable, and consequential. Physical AI readiness is not about raw intelligence — it is about constrained, purposeful execution. The robots that get this right will define the next generation of automation.